HYFLON SILICONE TERMAL SPRAYING
 
HYFLON® MFA LATEX - Typical Properties
HYFLON MFA is a perfluorinated thermoplastic copolymer of tetrafluoroethylene (TFE) and an appropriate perfluorinated vinylether (PFVE). HYFLON MFA derives its outstanding thermal and chemical resistance from the extremely strong carbon-fluorine bond. It has the advantage over PTFE of being a fully melt processable fluoropolymer (without any reduction of chemical properties). Therefore, it is possible to obtain coatings with very smooth surfaces.

MFA Latex is an MFA aqueous dispersion which can be applied on substrates by air gun or by impregnation by obtaining a polymer wall thickness in the range of 50 - 150 µm. Ausimont has developed an MFA latex for thin anti-stick coatings with a viscosity of 5 - 8 g/10'.

MFA dispersions can be used in their original form or in combination with a suitable primer which improves adhesion strength to the metal surface. It is suggested to use the same primers utilized for PTFE and PFA.

_NOTICE:All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. The user should not assume all safety measures are indicated, or that other measures may not be required. ALGOFLON, POLYMIST, HYFLON, HALAR, HYLAR 5000, HYLAR, TECNOFLON, GALDEN, and FOMBLIN are registered trademarks of AUSIMONT.
-HYFLON e HALAR sono marchi registrati della AUSIMONT